From e1948d3615bff4967d291a4cd964bd7eaf22b3c4 Mon Sep 17 00:00:00 2001
From: lexa <lexa-ch@mail.ru>
Date: Sun, 14 Feb 2021 16:45:23 +0300
Subject: [PATCH] BR add led

---
 BigRoomMyS/include/main.h | 40 +++++++++++++++++++
 BigRoomMyS/src/main.cpp   | 81 +++++++++++++++++++++++----------------
 2 files changed, 87 insertions(+), 34 deletions(-)
 create mode 100644 BigRoomMyS/include/main.h

diff --git a/BigRoomMyS/include/main.h b/BigRoomMyS/include/main.h
new file mode 100644
index 0000000..d0686cd
--- /dev/null
+++ b/BigRoomMyS/include/main.h
@@ -0,0 +1,40 @@
+#ifndef __MAIN__
+#define __MAIN__
+#include <Arduino.h>
+#include <Wire.h>
+#include "MHZ19.h"                                                                                                 
+
+#define MY_DEBUG
+#define MY_RADIO_RF24
+#define MY_RF24_CHANNEL (105)
+#define MY_RF24_PA_LEVEL RF24_PA_MAX
+
+#define MY_DEFAULT_ERR_LED_PIN (4)  // Error led pin
+#define MY_DEFAULT_RX_LED_PIN  (5)  // Receive led pin
+#define MY_DEFAULT_TX_LED_PIN  (6)  // the PCB, on board LED
+
+#include <MySensors.h>
+#include <SoftwareSerial.h>                               //  Remove if using HardwareSerial or non-uno compatabile device    
+#include <HTU21D.h>
+
+#define RX_PIN 8
+#define TX_PIN 7
+#define BAUDRATE 9600
+
+#define MOTION (7)
+#define LED_WHITE (5)
+#define LED_BLUE (6)
+MHZ19 myMHZ19;
+SoftwareSerial mySerial(RX_PIN, TX_PIN);
+HTU21D myHTU21D(HTU21D_RES_RH10_TEMP13);
+
+uint8_t periodMinCO2;
+uint8_t periodMotion;
+uint8_t curDelay;
+uint8_t spLight, dbLight;
+uint16_t levelBlue, levelWhite;
+bool move, lightWhite;
+
+
+
+#endif
\ No newline at end of file
diff --git a/BigRoomMyS/src/main.cpp b/BigRoomMyS/src/main.cpp
index 1319b70..24d7821 100644
--- a/BigRoomMyS/src/main.cpp
+++ b/BigRoomMyS/src/main.cpp
@@ -1,32 +1,4 @@
-#include <Arduino.h>
-#include <Wire.h>
-#include <AHT10.h>
-#include "MHZ19.h"                                                                                                 
-
-#define MY_DEBUG
-#define MY_RADIO_RF24
-#define MY_RF24_CHANNEL (105)
-#define MY_RF24_PA_LEVEL RF24_PA_MAX
-
-#define MY_DEFAULT_ERR_LED_PIN (4)  // Error led pin
-#define MY_DEFAULT_RX_LED_PIN  (5)  // Receive led pin
-#define MY_DEFAULT_TX_LED_PIN  (6)  // the PCB, on board LED
-
-#include <MySensors.h>
-#include <SoftwareSerial.h>                               //  Remove if using HardwareSerial or non-uno compatabile device    
-
-#define RX_PIN 8
-#define TX_PIN 7
-#define BAUDRATE 9600
-
-#define MOTION (6)
-
-MHZ19 myMHZ19;
-SoftwareSerial mySerial(RX_PIN, TX_PIN);
-
-uint8_t periodMin;
-uint8_t periodMotion;
-uint8_t curDelay;
+#include "main.h"
 
 void presentation();
 void sendDataI(MyMessage msg, uint32_t status);
@@ -66,25 +38,60 @@ void setup() {
   Serial.print("Temperature Cal: ");
   Serial.println(myMHZ19.getTempAdjustment());
   Serial.print("ABC Status: "); myMHZ19.getABC() ? Serial.println("ON") :  Serial.println("OFF");*/
-  periodMin = loadState(0);
-  if(periodMin == 0) periodMin = 1;
+  periodMinCO2 = loadState(0);
+  if(periodMinCO2 == 0) periodMinCO2 = 1;
   periodMotion = loadState(1);
   if(periodMotion == 0) periodMotion = 60;
+	spLight = (loadState(2) << 8) + loadState(3);
+	spLight = (loadState(4) << 8) + loadState(5);
+	levelBlue = (loadState(6) << 8) + loadState(7);
+	levelWhite = (loadState(8) << 8) + loadState(9);
+  myHTU21D.begin();
 }
 
 void loop() {
   static uint32_t cRun = millis();
   static uint8_t sec = 0;
   static uint8_t minuts = 0;
+  float temp, hum;
+
+  if(digitalRead(MOTION) > 0){
+    if(curDelay  == -1) sendDataB(msgMove, true);
+    move = true;
+    curDelay = periodMotion;
+  }
+
   uint16_t LightLev = analogRead(A0);
+  if (LightLev < spLight && move){
+    analogWrite(LED_BLUE, levelBlue);
+  }
+	else if((LightLev > (spLight + dbLight)) || (move == 0)){
+    analogWrite(LED_BLUE, 0);
+  }
+
+  if(lightWhite)
+    analogWrite(LED_WHITE, levelWhite);
+  else
+    analogWrite(LED_WHITE, 0);
+
   if((cRun + 1000) <= millis()){ //Once per second
     cRun = millis();
     sec++;
+    if(curDelay > 0) curDelay--;
+    if(curDelay == 0){
+      sendDataB(msgMove, false);
+      move = false;
+      curDelay = -1;
+    }
+    if((sec + 2) % 30 == 0){
+      temp = myHTU21D.readTemperature();
+      hum = myHTU21D.readCompensatedHumidity();
+    }
     if(sec == 59){
       minuts++;
       sec = 0;
     }
-    if(minuts == periodMin){
+    if(minuts == periodMinCO2){
       int CO2;                                        // Buffer for CO2
       CO2 = myMHZ19.getCO2();                         // Request CO2 (as ppm)
 
@@ -94,6 +101,12 @@ void loop() {
           sendDataI(msgCO2, CO2);
           wait(50);
       }
+      if(temp != HTU21D_ERROR){
+        sendDataF(msgTemp, temp);
+        wait(50);
+        sendDataF(msgHum, hum);
+        wait(50);
+      }
       sendDataI(msgTimeWork, cRun);
       minuts = 0;
     }
@@ -116,8 +129,8 @@ void receive(const MyMessage &message)
     saveState(1, periodMotion);
   }
   if((message.sensor == 3) && (message.type == V_VAR5)){
-    periodMin = message.getByte();
-    saveState(0, periodMin);
+    periodMinCO2 = message.getByte();
+    saveState(0, periodMinCO2);
   }
 }