diff --git a/Kuhnya/src/main.cpp b/Kuhnya/src/main.cpp
index d90d763..0a5cb11 100644
--- a/Kuhnya/src/main.cpp
+++ b/Kuhnya/src/main.cpp
@@ -9,15 +9,7 @@ BME280::PresUnit presUnit(BME280::PresUnit_Pa);
 
 LiquidCrystal_PCF8574 lcd(0x3F); // set the LCD address to 0x27 for a 16 chars and 2 line display
 
-//Adafruit_BME280 bme280; // use I2C interface
-//Adafruit_Sensor *bme_temp = bme280.getTemperatureSensor();
-//Adafruit_Sensor *bme_pressure = bme280.getPressureSensor();
-//Adafruit_Sensor *bme_humidity = bme280.getHumiditySensor();
-
-
-
 WiFiClient espClient;
-//PubSubClient client(espClient);
 
 Bounce butt = Bounce();
 
@@ -25,9 +17,6 @@ float tempC;
 char f[4];
 
 void setup() {
-  //Serial.begin(9600);
-  //Serial.println("Booting");  //  "Загрузка"
-
   pinMode(RED, OUTPUT);
   pinMode(GREEN, OUTPUT);
   pinMode(BLUE, OUTPUT);
@@ -45,7 +34,6 @@ void setup() {
   //Serial.print(error);
 
   if (error == 0) {
-    //Serial.println(": LCD found.");
     lcd.begin(16, 2); // initialize the lcd
     lcd.clear();
     lcd.setBacklight(255);
@@ -57,18 +45,6 @@ void setup() {
 
   WiFi.mode(WIFI_STA);
   WiFi.hostname("ESP-Kuh");
-//-----------------------------------------------------------------------
-  // WiFi.begin(ssid, password);
-  // while (WiFi.waitForConnectResult() != WL_CONNECTED) {
-  //   //Serial.println("Connection Failed! Rebooting...");
-  //   //  "Соединиться не удалось! Перезагрузка..."
-  //   delay(5000);
-  //   ESP.restart();
-  // }
-  // lcd.setCursor(0, 0);
-  // lcd.print("Connected");
-//-----------------------------------------------------------------------
-
   ArduinoOTA.onStart([]() { /*Serial.println("Start");*/});  //  "Начало OTA-апдейта"
   ArduinoOTA.onEnd([]() { /*Serial.println("\nEnd");*/});  //  "Завершение OTA-апдейта"
   ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) { /*Serial.printf("Progress: %u%%\r", (progress / (total / 100)));*/ });
@@ -82,10 +58,6 @@ void setup() {
   });
   ArduinoOTA.begin();
 
-  //Serial.println("Ready");  //  "Готово"
-  //Serial.print("IP address: ");  //  "IP-адрес: "
-  //Serial.println(WiFi.localIP());
-
   bme.begin();
 
   sensors.begin();
@@ -96,31 +68,24 @@ void setup() {
   delay(1000);
   lcd.setCursor(0, 0);
   lcd.print("Measure done... ");
-  //tempOut = sensors.getTempCByIndex(0);
   tempOut = sensors.getTempC(da[0]);
   if (tempOut == DEVICE_DISCONNECTED_C){
     tempOut = NAN;
     stat[0] = 0;
   }
   else stat[0] = 1;
-  //delay(100);
-  //tempHol = sensors.getTempCByIndex(1);
   tempHol = sensors.getTempC(da[1]);
   if (tempHol == DEVICE_DISCONNECTED_C){
     tempHol = NAN;
     stat[1] = 0;
   }
   else stat[1] = 1;
-  //delay(100);
-  //tempHoM = sensors.getTempCByIndex(2);
   tempHoM = sensors.getTempC(da[2]);
   if (tempHoM == DEVICE_DISCONNECTED_C){
     tempHoM = NAN;
     stat[2] = 0;
   }
   else stat[2] = 1;
-  //delay(100);
-  //tempMor = sensors.getTempCByIndex(3);
   tempMor = sensors.getTempC(da[3]);
   if (tempMor == DEVICE_DISCONNECTED_C){
     tempMor = NAN;
@@ -128,30 +93,17 @@ void setup() {
   }
   else stat[3] = 1;
 
-  //client.setServer(mqtt_server, 1883);
-  //client.setCallback(callback);
-
   EEPROM.begin(64);
   EEPROM.get(0, lightData);
 
   lightSP = lightData.SP;
   lightDB = lightData.DB;
-  /*lightData.DB = 20;
-  lightData.SP = 100;
-  EEPROM.put(0, lightData);
-  EEPROM.commit();*/
 
   minCount = 0;
   LCDpage = 0;
   lightOn = false;
   mv = prMV = digitalRead(MOVE_S);
-//-----------------------------------------------------------------------
-  // if (!client.connected()) {
-  //   reconnect();
-  // }
-  // if (client.connected())
-  //   client.publish("/home/kuh/move", String(mv).c_str());
-//-----------------------------------------------------------------------
+
 	wifiConnectHandler = WiFi.onStationModeGotIP(onWifiConnect);
 	wifiDisconnectHandler = WiFi.onStationModeDisconnected(onWifiDisconnect);
 
@@ -162,10 +114,8 @@ void setup() {
   mqttClient.setClientId("ESPKuh");
 
 	connectToWifi();
-//-----------------------------------------------------------------------
 
   crun = millis();
-//  bmeread = true;
 }
 
 void loop() {
@@ -188,19 +138,11 @@ void loop() {
         //mv = true;
         lcd.setBacklight(255);
         mqttClient.publish("/home/kuh/move", 1, false, "1");
-//-----------------------------------------------------------------------
-        // if (client.connected())
-        //   client.publish("/home/kuh/move", String(mv).c_str());
-//-----------------------------------------------------------------------
       }
       else{
         //mv = false;
         lcd.setBacklight(0);
         mqttClient.publish("/home/kuh/move", 1, false, "0");
-//-----------------------------------------------------------------------
-        // if (client.connected())
-        //   client.publish("/home/kuh/move", String(mv).c_str());
-//-----------------------------------------------------------------------
       }
       prMV = mv;
     }
@@ -244,44 +186,26 @@ void loop() {
 
 void showLCD(int page, bool l_on)
 {
-  //char s[5];
   char outS[20];
-  //String s1, s2;
-  /*if(l_on) lcd.setBacklight(255);
-  else lcd.setBacklight(0);*/
   switch (page)
   {
   case 0:
-    //s1 = String(tempOut, 1);
-    //s2 = String(tempIn, 1);
-
     lcd.setCursor(0, 0);
-    //snprintf(outS, 17, "O:%5sC I:%4sC ", s1.c_str(), s2.c_str());
     lcd.printf("O:%5.1fC I:%4.1fC ", tempOut, tempIn);
     lcd.setCursor(0, 1);
-    //s1 = String(hum, 1);
-    //s2 = String(press, 0);
-    //snprintf(outS, 17, "H:%4s%% Pr:%3smm", s1.c_str(), s2.c_str());
     lcd.printf("H:%4.1f%% Pr:%3.0fmm", hum, press);
     break;
   case 1:
-    //s1 = String(tempHol, 1);
-    //s2 = String(tempHoM, 1);
     lcd.setCursor(0, 0);
-    //snprintf(outS, 17, "H:%4sC M:%5sC ", s1.c_str(), s2.c_str());
     lcd.printf("H:%4.1fC M:%5.1fC ", tempHol, tempHoM);
-    //s1 = String(tempMor, 1);
     lcd.setCursor(0, 1);
-    //snprintf(outS, 17, "Mor:%5sC      ", s1.c_str());
     lcd.printf("Mor:%5.1fC      ", tempMor);
     break;
   case 2:
     lcd.setCursor(0, 0);
-    //snprintf(outS, 17, "L: %3d SP: %3d  ", adc, lightSP);
     lcd.printf("L: %3d SP: %3d  ", adc, lightSP);
     lcd.print(outS);
     lcd.setCursor(0, 1);
-    //snprintf(outS, 17, "DB: %2d MS: %1d L:%1d", lightDB, mv, lightOn);
     lcd.printf("DB: %2u MS: %1u L:%1d", lightDB, mv, lightOn);
     break;
   case 3:
@@ -295,43 +219,8 @@ void showLCD(int page, bool l_on)
   }
 }
 
-// void callback(char* topic, byte* message, unsigned int length) {
-//   bool w = false;
-//   //Serial.print("Message arrived on topic: ");
-//   //  "Сообщение прибыло в топик: "
-//   //Serial.print(topic);
-//   //Serial.print(". Message: ");  //  ". Сообщение: "
-//   String messageTemp;
-  
-//   for (unsigned int i = 0; i < length; i++) {
-//     //Serial.print((char)message[i]);
-//     messageTemp += (char)message[i];
-//   }
-//   if(strcmp(topic, "/home/kuh/light_sp_set") == 0){
-//     lightSP = messageTemp.toInt();
-//     w = true;
-//   }
-//   if(strcmp(topic, "/home/kuh/light_db_set") == 0){
-//     lightDB = messageTemp.toInt();
-//     w = true;
-//   }
-//   if(w){
-//     lightData.SP = lightSP;
-//     lightData.DB = lightDB;
-//     EEPROM.put(0, lightData);
-//     EEPROM.commit();
-//   }
-//   Serial.println();
-// }
-
 void publishSec()
 {
-  // if (!client.connected()) {
-  //   reconnect();
-  // }
-  // if(!client.loop())
-  //   client.connect("ESPKuh");
-  // if (client.connected()) {
   digitalWrite(GREEN, HIGH);
   dtostrf(tempOut, 6, 1, strFVal);
   mqttClient.publish("/hometest/kuh1s/temp_out", 1, false, strFVal);
@@ -357,12 +246,6 @@ void publishSec()
 
 void publishMin()
 {
-  // if (!client.connected()) {
-  //   reconnect();
-  // }
-  // if(!client.loop())
-  //   client.connect("ESPKuh");
-  // if (client.connected()) {
   digitalWrite(BLUE, HIGH);
   if(!isnan(tempOut)){
     dtostrf(tempOut, 6, 1, strFVal);
@@ -400,32 +283,9 @@ void publishMin()
   }
   ultoa(crun, strFVal, 10);
   mqttClient.publish("/home/kuh/millis", 1, false, strFVal);
-//  digitalWrite(BLUE, LOW);
-//  }
+  digitalWrite(BLUE, LOW);
 }
 
-// void reconnect() {
-//   digitalWrite(RED, HIGH);
-//   //Serial.print("Attempting MQTT connection...");
-//   // "Попытка подключиться к MQTT-брокеру... "
-//   // Пытаемся подключиться:
-//   if (client.connect("ESPKuh")) {
-//     //Serial.println("connected");  //  "подключен"
-//     // подписываемся или переподписываемся на топик;
-//     // можно подписаться не только на один, а на несколько топиков
-//     client.subscribe("/home/kuh/light_sp_set");
-//     client.subscribe("/home/kuh/light_db_set");
-//     client.publish("/home/kuh/light_db_set", String(lightData.DB).c_str());
-//     client.publish("/home/kuh/light_sb_set", String(lightData.SP).c_str());
-//   } else {
-//     //Serial.print("failed, rc=");  //  "подключение не удалось"
-//     //Serial.print(client.state());
-//     //Serial.println(" try again in 5 seconds");
-//   }
-//   delay(100);
-//   digitalWrite(RED, LOW);
-// }
-
 void getTemp()
 {
   static bool readTemp = false;
@@ -436,10 +296,6 @@ void getTemp()
   }
   else{
     float t = sensors.getTempC(da[nSens]);//ByIndex(nSens);
-    //float t = sensors.getTempCByIndex(nSens);
-    //Serial.print(nSens);
-    //Serial.print(" Temp readed=");
-    //Serial.println(t);
     if ((t > -127) && (t < 85)){
       stat[nSens] = 1;
       switch(nSens){