Change KorMYS LED Inv

KorMYS/src/main.cpp

@@ -12,7 +12,7 @@
 // Set blinking period
 #define MY_DEFAULT_LED_BLINK_PERIOD 300
 // Inverses the behavior of leds
-#define MY_WITH_LEDS_BLINKING_INVERSE
+//#define MY_WITH_LEDS_BLINKING_INVERSE
 // Flash leds on rx/tx/err
 #define MY_DEFAULT_ERR_LED_PIN A3  // Error led pin
 #define MY_DEFAULT_TX_LED_PIN  A4  // the PCB, on board LED
@@ -30,6 +30,7 @@ bool lamp;
 #define RX_PIN 2
 #define TX_PIN 3
 #define LAMP_OUT 5
+#define PIN_MOVE 7
 SoftwareSerial sSerial(RX_PIN, TX_PIN);
 SDS011 sds;
 
@@ -58,7 +59,7 @@ void setup()
   //Serial.println(sds.setCustomWorkingPeriod(3).toString()); // sensor sends data every 3 minutes
   //sds.setActiveReportingMode();
   //sds.setCustomWorkingPeriod(1);
-	pinMode(A1, INPUT_PULLUP);
+	pinMode(PIN_MOVE, INPUT_PULLUP);
 	pinMode(LAMP_OUT, OUTPUT);
 	//digitalWrite(7, HIGH);
 	//saveState(6, 2);
@@ -98,9 +99,8 @@ void loop()
 {
 	float p25, p10;
 	uint32_t curTime;
-	//move = digitalRead(A1);
 
-  if(digitalRead(A1) > 0){
+  if(digitalRead(PIN_MOVE) > 0){
     if(curDelay == -1) sendData(msgMove, true);
 		move = true;
     curDelay = timeDelay;
@@ -127,8 +127,8 @@ void loop()
 		}
 	}
 	else if((adc > (minLight + minLightDB)) || (move == 0)){
-		//analogWrite(LAMP_OUT, 0);
-		curDelay = 2;
+		analogWrite(LAMP_OUT, 0);
+		//curDelay = 2;
 		if(lamp == true){
 			Serial.println("Lamp OFF");
 			Serial.print("ADC: ");Serial.print(adc);
@@ -169,14 +169,14 @@ void loop()
 			send(msgMillis.set(ms));
 		}
 	}
-	if(lamp && curTime > millis()){
+	/*if(lamp && curTime > millis()){
     uint8_t ll = int(LightInt - LightInt * (1 - curTime - millis() / float(fadeTime * 1000)));
     analogWrite(LAMP_OUT, ll);
     if(curTime - millis() < 10){
 			lamp = false;
 			analogWrite(LAMP_OUT, 0);
 		}
-	}
+	}*/
 }
 
 void receive(const MyMessage &message)

Sw_Koridor/src/main.cpp

@@ -50,6 +50,7 @@ void onMqttMessage(char* topic, char* payload, AsyncMqttClientMessageProperties
 void oneClick()
 {
   switchLight(R_LED, !digitalRead(R_LED), true);
+  //Serial.println("Press");
 	//lStat1 = !lStat1;
 }
 
@@ -67,18 +68,18 @@ void longPress()
 }
 
 void setup() {
-  // Serial.begin(9600);
-  // Serial.println("Booting");  //  "Загрузка"
+  //Serial.begin(115200);
+  //Serial.println("Booting");  //  "Загрузка"
   WiFi.mode(WIFI_STA);
   WiFi.hostname("SW-Koridor");
   ArduinoOTA.onStart([]() {
-    // Serial.println("Start");  //  "Начало OTA-апдейта"
+    //Serial.println("Start");  //  "Начало OTA-апдейта"
   });
   ArduinoOTA.onEnd([]() {
-    // Serial.println("\nEnd");  //  "Завершение OTA-апдейта"
+    //Serial.println("\nEnd");  //  "Завершение OTA-апдейта"
   });
   ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
-    // Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
+    //Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
   });
   ArduinoOTA.onError([](ota_error_t error) {
     // Serial.printf("Error[%u]: ", error);
@@ -93,19 +94,23 @@ void setup() {
     // else if (error == OTA_END_ERROR) Serial.println("End Failed");
     // //  "Ошибка при завершении OTA-апдейта"
   });
+  // Serial.println("OTA Begin");
   ArduinoOTA.begin();
+  // Serial.println("OTA Done");
+  //Serial.end();
 
   pinMode(B_LED, FUNCTION_3);
   pinMode(B_LED, OUTPUT);
   digitalWrite(B_LED, HIGH);
   pinMode(R_LED, OUTPUT);
   pinMode(BUTT, INPUT_PULLUP);
+  // Serial.println("EEPROM Begin");
   EEPROM.begin(16);
   uint8_t lstat = 0;
   EEPROM.get(0, lstat);
   //oldLStat1 = lStat1;
   // Serial.print("Lamp1: ");
-  // Serial.println(lStat1);
+  //Serial.println(lStat1);
   digitalWrite(R_LED, lstat);
   //oldLStat2 = lStat2;
 
@@ -127,7 +132,8 @@ void setup() {
 
 	//attachInterrupt(digitalPinToInterrupt(BUTT), sw_func, RISING);
 
-	connectToWifi();
+	// Serial.println("WiFi Connect");
+  connectToWifi();
 
   cRun = millis();
 }
@@ -164,24 +170,24 @@ bool switchLight(uint8_t nLamp, int state, bool pub)
 }
 
 void connectToWifi() {
-  //Serial.println("Connecting to Wi-Fi...");
+  // Serial.println("Connecting to Wi-Fi...");
   WiFi.begin(ssid, password);
 }
 
 void connectToMqtt() {
-  //Serial.println("Connecting to MQTT...");
+  // Serial.println("Connecting to MQTT...");
   mqttClient.connect();
 }
 
 void onWifiConnect(const WiFiEventStationModeGotIP& event) {
-  //Serial.println("Connected to Wi-Fi.");
-  //Serial.print("IP: ");
-  //Serial.println(WiFi.localIP());
+  // Serial.println("Connected to Wi-Fi.");
+  // Serial.print("IP: ");
+  // Serial.println(WiFi.localIP());
   connectToMqtt();
 }
 
 void onWifiDisconnect(const WiFiEventStationModeDisconnected& event) {
-  //Serial.println("Disconnected from Wi-Fi.");
+  // Serial.println("Disconnected from Wi-Fi.");
   mqttReconnectTimer.detach(); // ensure we don't reconnect to MQTT while reconnecting to Wi-Fi
   wifiReconnectTimer.once(2, connectToWifi);
 }
@@ -194,7 +200,7 @@ void onMqttConnect(bool sessionPresent) {
 }
 
 void onMqttDisconnect(AsyncMqttClientDisconnectReason reason) {
-  //Serial.println("Disconnected from MQTT.");
+  // Serial.println("Disconnected from MQTT.");
 
   if (WiFi.isConnected()) {
     mqttReconnectTimer.once(2, connectToMqtt);