diff --git a/MainDoor/platformio.ini b/MainDoor/platformio.ini
index 0d19d09..486c532 100644
--- a/MainDoor/platformio.ini
+++ b/MainDoor/platformio.ini
@@ -15,8 +15,8 @@ framework = arduino
 board_build.f_cpu = 26000000L
 board_build.ldscript = eagle.flash.1m.ld
 ;board_build.flash_mode = dout
-upload_protocol = espota
-upload_port = 192.168.1.25
+;upload_protocol = espota
+;upload_port = 192.168.1.25
 lib_deps =
   # RECOMMENDED
   # Accept new functionality in a backwards compatible manner and patches
diff --git a/MainDoor/src/main.cpp b/MainDoor/src/main.cpp
index 58d126f..608e8f3 100644
--- a/MainDoor/src/main.cpp
+++ b/MainDoor/src/main.cpp
@@ -7,6 +7,13 @@
 #include <PCF8574.h>
 #include <leds.h>
 
+// Set your Static IP address
+IPAddress local_IP(192, 168, 1, 154);
+// Set your Gateway IP address
+IPAddress gateway(192, 168, 1, 1);
+
+IPAddress subnet(255, 255, 255, 0);
+
 const char* ssid = "wf-home";
 const char* password = "0ndthnrf";
 const char* mqtt_server = "192.168.1.111";
@@ -47,7 +54,7 @@ bool l_m = false;
 void trim(char *s);
 
 void connectToWifi() {
-  Serial.println("Connecting to Wi-Fi...");
+  Serial.printf("Millis %lu, Connecting to Wi-Fi...", millis());
   WiFi.begin(ssid, password);
 }
 
@@ -57,7 +64,7 @@ void connectToMqtt() {
 }
 
 void onWifiConnect(const WiFiEventStationModeGotIP& event) {
-  Serial.println("Connected to Wi-Fi.");
+  Serial.printf_P("Millis %lu, Connected to Wi-Fi.", millis());
   Serial.print("IP: ");
   Serial.println(WiFi.localIP());
   digitalWrite(L_WIFI, HIGH);
@@ -131,15 +138,18 @@ void onMqttMessage(char* topic, char* payload, AsyncMqttClientMessageProperties
 }
 
 void onMqttPublish(uint16_t packetId) {
-  Serial.println("Publish acknowledged.");
-  Serial.print("  packetId: ");
-  Serial.println(packetId);
+  //Serial.println("Publish acknowledged.");
+  //Serial.print("  packetId: ");
+  //Serial.println(packetId);
   msg.start();
 }
 
 void setup() {
   Serial.begin(9600);
   Serial.println("Begin");
+  if (!WiFi.config(local_IP, gateway, subnet)) {
+    Serial.println("STA Failed to configure");
+  }
   WiFi.mode(WIFI_STA);
   WiFi.hostname("Door-Koridor");
   ArduinoOTA.onStart([]() {
@@ -242,7 +252,7 @@ void loop() {
   // uint8_t dC = digitalRead(L_DOWN);
   // uint8_t sC = digitalRead(L_SMALL);
   uint8_t tC, iC, dC, sC;
-  char v[10];
+  //char v[10];
   msg.tick();
   //door = digitalRead(DOOR);
   if(l_m && (l_run + 100) < millis()){
@@ -361,7 +371,7 @@ void loop() {
 void trim(char *s)
 {
      // удаляем пробелы и табы с начала строки:
-     int i=0,j;
+     unsigned int i=0,j;
      while((s[i]==' ')||(s[i]=='\t')) 
      {
           i++;