Added Koridor MyS

KorMYS/.gitignore

@@ -0,0 +1,5 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch

KorMYS/.vscode/extensions.json

@@ -0,0 +1,7 @@
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide"
+    ]
+}

KorMYS/include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

KorMYS/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

KorMYS/platformio.ini

@@ -0,0 +1,16 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:uno]
+platform = atmelavr
+board = uno
+framework = arduino
+lib_deps = featherfly/SoftwareSerial @ ^1.0
+monitor_speed = 115200

KorMYS/src/main.cpp

@@ -0,0 +1,157 @@
+#include <Arduino.h>
+/**
+* The MySensors Arduino library handles the wireless radio link and protocol
+* between your home built sensors/actuators and HA controller of choice.
+* The sensors forms a self healing radio network with optional repeaters. Each
+* repeater and gateway builds a routing tables in EEPROM which keeps track of the
+* network topology allowing messages to be routed to nodes.
+*
+* Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
+* Copyright (C) 2013-2019 Sensnology AB
+* Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
+*
+* Documentation: http://www.mysensors.org
+* Support Forum: http://forum.mysensors.org
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License
+* version 2 as published by the Free Software Foundation.
+*
+*******************************
+*
+* DESCRIPTION
+* The ArduinoGateway prints data received from sensors on the serial link.
+* The gateway accepts input on serial which will be sent out on radio network.
+*
+* The GW code is designed for Arduino Nano 328p / 16MHz
+*
+* Wire connections (OPTIONAL):
+* - Inclusion button should be connected between digital pin 3 and GND
+* - RX/TX/ERR leds need to be connected between +5V (anode) and digital pin 6/5/4 with resistor 270-330R in a series
+*
+* LEDs (OPTIONAL):
+* - To use the feature, uncomment any of the MY_DEFAULT_xx_LED_PINs
+* - RX (green) - blink fast on radio message received. In inclusion mode will blink fast only on presentation received
+* - TX (yellow) - blink fast on radio message transmitted. In inclusion mode will blink slowly
+* - ERR (red) - fast blink on error during transmission error or receive crc error
+*
+*/
+
+// Enable debug prints to serial monitor
+#define MY_DEBUG
+
+
+// Enable and select radio type attached
+#define MY_RADIO_RF24
+//#define MY_RADIO_NRF5_ESB
+//#define MY_RADIO_RFM69
+//#define MY_RADIO_RFM95
+
+// Set LOW transmit power level as default, if you have an amplified NRF-module and
+// power your radio separately with a good regulator you can turn up PA level.
+#define MY_RF24_PA_LEVEL RF24_PA_HIGH
+
+// Enable serial gateway
+//#define MY_GATEWAY_SERIAL
+
+// Define a lower baud rate for Arduinos running on 8 MHz (Arduino Pro Mini 3.3V & SenseBender)
+#if F_CPU == 8000000L
+#define MY_BAUD_RATE 38400
+#endif
+
+#define MY_TRANSPORT_WAIT_READY_MS 10000
+// Enable inclusion mode
+//#define MY_INCLUSION_MODE_FEATURE
+// Enable Inclusion mode button on gateway
+//#define MY_INCLUSION_BUTTON_FEATURE
+
+// Inverses behavior of inclusion button (if using external pullup)
+//#define MY_INCLUSION_BUTTON_EXTERNAL_PULLUP
+
+// Set inclusion mode duration (in seconds)
+//#define MY_INCLUSION_MODE_DURATION 60
+// Digital pin used for inclusion mode button
+//#define MY_INCLUSION_MODE_BUTTON_PIN  3
+
+// Set blinking period
+#define MY_DEFAULT_LED_BLINK_PERIOD 300
+
+// Inverses the behavior of leds
+#define MY_WITH_LEDS_BLINKING_INVERSE
+
+// Flash leds on rx/tx/err
+// Uncomment to override default HW configurations
+#define MY_DEFAULT_ERR_LED_PIN 4  // Error led pin
+#define MY_DEFAULT_RX_LED_PIN  6  // Receive led pin
+#define MY_DEFAULT_TX_LED_PIN  5  // the PCB, on board LED
+
+#include <MySensors.h>
+//#include <SdsDustSensor.h>
+#include <SDS011.h>
+#include <SoftwareSerial.h>
+
+unsigned long cRun;
+int cSec;
+#define RX_PIN 2
+#define TX_PIN 3
+SoftwareSerial sSerial(RX_PIN, TX_PIN);
+SDS011 sds;
+//SdsDustSensor sds(sSerial);
+MyMessage msgHum25(0, V_LEVEL);
+MyMessage msgHum25_UN(0, V_UNIT_PREFIX);
+MyMessage msgHum10(1, V_LEVEL);
+MyMessage msgHum10_UN(1, V_UNIT_PREFIX);
+void SDS011workmode(byte mode, SoftwareSerial *ser);
+
+void setup()
+{
+	Serial.begin(115200);
+	sSerial.begin(9600);
+	//set_per(2, &sSerial);
+  SDS011workmode(2, &sSerial);
+  sds.begin(&sSerial);
+	Serial.println("Begin");
+  //Serial.println(sds.queryFirmwareVersion().toString()); // prints firmware version
+  //Serial.println(sds.setActiveReportingMode().toString()); // ensures sensor is in 'active' reporting mode
+  //Serial.println(sds.setCustomWorkingPeriod(3).toString()); // sensor sends data every 3 minutes
+  //sds.setActiveReportingMode();
+  //sds.setCustomWorkingPeriod(1);
+	cRun = millis();
+	cSec = 0;
+}
+
+void presentation()
+{
+	present(0, S_DUST, "pm2.5");
+	present(1, S_DUST, "pm10");
+}
+
+void loop()
+{
+	float p25, p10;
+	if(cRun + 999 < millis()){
+		cRun = millis();
+		
+		int error = sds.read(&p25, &p10);
+		if (!error) {
+			Serial.println(millis()/1000);
+			Serial.println("P2.5: " + String(p25));
+			Serial.println("P10:  " + String(p10));
+			send(msgHum25.set(p25, 1));
+			wait(100);
+			send(msgHum10.set(p10, 1));
+		}
+	}
+}
+
+//////////////////  sends work mode command to SDS011  //////////////////////
+
+void SDS011workmode(byte mode, SoftwareSerial *ser)
+{
+  byte cs = 7 + mode;
+  uint8_t sleep_command[] = {0xAA, 0xB4, 0x08, 0x01, mode, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, cs, 0xAB};      
+//                                                     ^^ 0 for continuous, 1-30 for 1-30 min delay between turns on.              ^^ checksum: 07 for 0x00, 08 for 0x01 and so on
+  for (uint8_t i = 0; i < 19; i++) {
+    ser->write(sleep_command[i]);
+  }
+}

KorMYS/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html

MYS_Home.code-workspace

@@ -62,6 +62,10 @@
 		{
 			"name": "MidRoomNLight",
 			"path": "MidRoomNLight"
+		},
+		{
+			"name": "KorMYS",
+			"path": "KorMYS"
 		}
 	],
 	"settings": {

SerialGateWayMyS/platformio.ini

@@ -10,6 +10,8 @@
 
 [env:nanoatmega328]
 platform = atmelavr
-board = nanoatmega328
+;board = nanoatmega328
+board = uno
 framework = arduino
 monitor_speed = 115200
+lib_deps = featherfly/SoftwareSerial @ ^1.0

SerialGateWayMyS/src/main.cpp

@@ -85,18 +85,83 @@
 #define MY_DEFAULT_TX_LED_PIN  5  // the PCB, on board LED
 
 #include <MySensors.h>
+//#include <SdsDustSensor.h>
+#include <SDS011.h>
+#include <SoftwareSerial.h>
+
+unsigned long cRun;
+int cSec;
+#define RX_PIN 2
+#define TX_PIN 3
+SoftwareSerial sSerial(RX_PIN, TX_PIN);
+SDS011 sds;
+//SdsDustSensor sds(sSerial);
+MyMessage msgHum25(0, V_LEVEL);
+MyMessage msgHum25_UN(0, V_UNIT_PREFIX);
+MyMessage msgHum10(1, V_LEVEL);
+MyMessage msgHum10_UN(1, V_UNIT_PREFIX);
+void set_per(uint8_t per, SoftwareSerial *ser);
 
 void setup()
 {
-	// Setup locally attached sensors
+	Serial.begin(115200);
+	sSerial.begin(9600);
+	set_per(2, &sSerial);
+  sds.begin(&sSerial);
+	Serial.println("Begin");
+  //Serial.println(sds.queryFirmwareVersion().toString()); // prints firmware version
+  //Serial.println(sds.setActiveReportingMode().toString()); // ensures sensor is in 'active' reporting mode
+  //Serial.println(sds.setCustomWorkingPeriod(3).toString()); // sensor sends data every 3 minutes
+  //sds.setActiveReportingMode();
+  //sds.setCustomWorkingPeriod(1);
+	cRun = millis();
+	cSec = 0;
 }
 
 void presentation()
 {
-	// Present locally attached sensors
+	present(0, S_DUST, "pm2.5");
+	present(1, S_DUST, "pm10");
 }
 
 void loop()
 {
-	// Send locally attached sensor data here
+	float p25, p10;
+	if(cRun + 999 < millis()){
+		cRun = millis();
+		
+		int error = sds.read(&p25, &p10);
+		if (!error) {
+			Serial.println(millis()/1000);
+			Serial.println("P2.5: " + String(p25));
+			Serial.println("P10:  " + String(p10));
+		}
+/*		PmResult pm = sds.readPm();
+		if (pm.isOk()) {
+			send(msgHum25.set(pm.pm25, 2));
+			wait(100);
+			send(msgHum10.set(pm.pm10, 2));
+		}
+		if(++cSec == 60){
+			wait(100);
+			send(msgHum25_UN.set("pm2.5"));
+			wait(100);
+			send(msgHum10_UN.set("pm10"));
+		}*/
+	}
+}
+
+void set_per(uint8_t per, SoftwareSerial *ser)
+{
+	ser->write(0xAA);
+	ser->write(0xB4);
+	ser->write(0x08);
+	ser->write(0xAA);
+	ser->write(0x01);
+	for(int i = 0; i < 10; i++) ser->print(0x00);
+	ser->write(0xFF);
+	ser->write(0xFF);
+	uint8_t crc = 0x07 + per;
+	ser->write(crc);
+	ser->write(0xAB);
 }