Ext Sens changed to HTU21D

ESP_Midroom2/.vscode/settings.json

@@ -0,0 +1,17 @@
+{
+  "files.associations": {
+    "array": "cpp",
+    "*.tcc": "cpp",
+    "deque": "cpp",
+    "list": "cpp",
+    "string": "cpp",
+    "unordered_map": "cpp",
+    "vector": "cpp",
+    "string_view": "cpp",
+    "memory": "cpp",
+    "random": "cpp",
+    "initializer_list": "cpp",
+    "ranges": "cpp",
+    "regex": "cpp"
+  }
+}

ESP_Midroom2/platformio.ini

@@ -25,5 +25,6 @@ lib_deps =
   ayushsharma82/AsyncElegantOTA @ ^2.2.6
   ayushsharma82/WebSerial @ ^1.3.0
   jwrw/ESP_EEPROM @ ^2.0.0
-  beegee-tokyo/DHT sensor library for ESPx @ ^1.19
+  #beegee-tokyo/DHT sensor library for ESPx @ ^1.19
-
+  https://github.com/enjoyneering/HTU2xD_SHT2x_Si70xx.git
+  https://github.com/pilotak/MeteoFunctions.git

ESP_Midroom2/src/main.cpp

@@ -1,6 +1,7 @@
 #include <Arduino.h>
 //#include <Adafruit_AHTX0.h>
-#include "DHTesp.h"
+//#include "DHTesp.h"
+#include <Wire.h>
 #include <ArduinoOTA.h>
 #include <Ticker.h>
 #include <ESP8266WiFi.h>
@@ -10,6 +11,8 @@
 #include <ESP8266WiFiMulti.h>
 #include <ESP_EEPROM.h>
 #include <PubSubClient.h>
+#include <HTU2xD_SHT2x_Si70xx.h>
+#include <MeteoFunctions.h>
 
 #define WIFI_SSID "wf-home"
 #define WIFI_PASSWORD "0ndthnrf"
@@ -25,12 +28,11 @@
 
 #define LAMP_OUT (D5)
 
-//Adafruit_AHTX0 aht;
+HTU2xD_SHT2x_SI70xx ht2x(HTU2xD_SENSOR, HUMD_12BIT_TEMP_14BIT); //sensor type, resolution
-DHTesp dht;
+MeteoFunctions calc;
-TempAndHumidity sTaH;
 
-//sensors_event_t humidity, temp;
+
-float temp_out, hum_out;
+float temp_out, hum_out, windspeed, heatindex, dewpoint, apptemp;
 
 WiFiClient espClient;
 PubSubClient client(espClient);
@@ -44,6 +46,7 @@ void onWifiConnect(const WiFiEventStationModeGotIP& event);
 void onWifiDisconnect(const WiFiEventStationModeDisconnected& event);
 void callback(char* topic, byte* payload, unsigned int length);
 void reconnect();
+boolean getTiH(void);
 
 unsigned long stled;
 float wMins = 0;
@@ -56,6 +59,8 @@ AsyncWebServer server(80);
 
 void setup() {
   Serial.begin(9600);
+  //Wire.begin(); // This function initializes the Wire library
+
   WiFi.mode(WIFI_STA);
   WiFi.persistent(false);
   WiFi.hostname(HOSTNAME);
@@ -98,33 +103,41 @@ void setup() {
   pinMode(LED_MQ, OUTPUT);
   pinMode(LED_WRK, OUTPUT);
   pinMode(LAMP_OUT, OUTPUT);
-  dht.setup(D1, DHTesp::DHT22);
+
-  delay(dht.getMinimumSamplingPeriod());
+  connectToWifi();
-  sTaH = dht.getTempAndHumidity();
+
-  if(dht.getStatus() == dht.ERROR_NONE){
+  // while (ht2x.begin() != true) //reset sensor, set heater off, set resolution, check power (sensor doesn't operate correctly if VDD < +2.25v)
-    temp_out = sTaH.temperature - 2.0;
+  // {
-    hum_out = sTaH.humidity;
+  //   //Serial.println(F("HTU2xD/SHT2x not connected, fail or VDD < +2.25v")); //(F()) save string to flash & keeps dynamic memory free
-  }
+  //   digitalWrite(LED_WF, LOW);
-  // if (! aht.begin()) {
+
-  //   Serial.println("Could not find AHT? Check wiring");
+  //   delay(500);
-  //   aht_pesent = false;
-  // } else{
-  //   if(aht.getEvent(&humidity, &temp)){
-  //     temp_out = temp.temperature;
-  //     hum_out = humidity.relative_humidity;
   // }
-  //   aht_pesent = true;
+  // digitalWrite(LED_WF, HIGH);
+  //ht2x.begin();
+  temp_out = NAN;
+  hum_out = NAN;
+  ht2x.begin();
+  getTiH();
+////////////////////////////////
+  // dht.setup(D1, DHTesp::DHT22);
+  // delay(dht.getMinimumSamplingPeriod());
+  // sTaH = dht.getTempAndHumidity();
+  // if(dht.getStatus() == dht.ERROR_NONE){
+  //   temp_out = sTaH.temperature - 2.0;
+  //   hum_out = sTaH.humidity;
   // }
+////////////////////////////////
   EEPROM.begin(4);
   EEPROM.get(0, led_intense);
   Serial.print("Led intense: ");
   Serial.println(int(led_intense / 2.55));
-  connectToWifi();
 
   stled = millis();
   WebSerial.begin(&server);
   /* Attach Message Callback */
   server.begin();
+  windspeed = 0;
 }
 
 void loop() {
@@ -132,7 +145,6 @@ void loop() {
   static byte bSecs = 0;
   char v[10];
   static unsigned long ledTime = 0;
-  float fTemp;
 
 	ArduinoOTA.handle();
   if(!client.connected()) reconnect();
@@ -149,71 +161,28 @@ void loop() {
   if(stled + 300 < millis()){
     digitalWrite(LED_WRK, HIGH);
   }
-  if(cRun + 2000 <= millis()){
+  if(cRun + 10000 <= millis()){
     cRun = millis();
     Serial.println(bSecs);
-    sTaH = dht.getTempAndHumidity();
+    WebSerial.println("10 sec");
-    if(dht.getStatus() == dht.ERROR_NONE){
+    if(getTiH()){
-      fTemp = sTaH.temperature - 2.0;
+      //if(bSecs == 3){
-      temp_out += (fTemp - temp_out) / 150.0;
+        //bSecs = 0;
-      hum_out += (sTaH.humidity - hum_out) / 150.0;
-      WebSerial.print("Temp: ");
-      WebSerial.print(fTemp);
-      WebSerial.print(", Hum: ");
-      WebSerial.println(sTaH.humidity);
-      if(bSecs == 29){
-        bSecs = 0;
         digitalWrite(LED_WRK, LOW);
         sprintf(v, "%.1f", temp_out);
         client.publish(TOPIC"tempout", v);
         sprintf(v, "%.1f", hum_out);
         client.publish(TOPIC"humout", v);
-        sprintf(v, "%.1f", dht.computeHeatIndex(temp_out, hum_out));
+        sprintf(v, "%.1f", heatindex);
         client.publish(TOPIC"heatindex", v);
-        sprintf(v, "%.1f", dht.computeDewPoint(temp_out, hum_out));
+        sprintf(v, "%.1f", dewpoint);
         client.publish(TOPIC"dewpoint", v);
-        ComfortState cs;
+        sprintf(v, "%.1f", apptemp);
-        dht.getComfortRatio(cs, temp_out, hum_out);
+        client.publish(TOPIC"appTemp", v);
-        String comfortStatus;
+      //}
-        switch(cs) {
-          case Comfort_OK:
-            comfortStatus = "Нормально";
-            break;
-          case Comfort_TooHot:
-            comfortStatus = "Очень жарко";
-            break;
-          case Comfort_TooCold:
-            comfortStatus = "Очень холодно";
-            break;
-          case Comfort_TooDry:
-            comfortStatus = "Очень сухо";
-            break;
-          case Comfort_TooHumid:
-            comfortStatus = "Очень влажно";
-            break;
-          case Comfort_HotAndHumid:
-            comfortStatus = "Жарко и влажно";
-            break;
-          case Comfort_HotAndDry:
-            comfortStatus = "Жарко и сухо";
-            break;
-          case Comfort_ColdAndHumid:
-            comfortStatus = "Холодно и влажно}";
-            break;
-          case Comfort_ColdAndDry:
-            comfortStatus = "Холодно и сухо";
-            break;
-          default:
-            comfortStatus = "Неизвестно";
-            break;
-        };
-        client.publish(TOPIC"comfortstatus", comfortStatus.c_str());
-        byte hp = dht.computePerception(temp_out, hum_out);
-        itoa(hp, v, 10);
-        client.publish(TOPIC"perception", v);
     }
-    }
+    if(bSecs == 3){
-    if((bSecs % 15) == 0){
+      bSecs = 0;
       wMins += 0.5;
       Serial.println("halfMinTick");
       sprintf(v, "%.1f", wMins);
@@ -272,6 +241,9 @@ void callback(char* topic, byte* payload, unsigned int length) {
     EEPROM.commit();
     if (led) analogWrite(LAMP_OUT, led_intense);
   }
+  if(strcmp(topic, TOPIC"windspeed") == 0){
+    windspeed = strtof(val, NULL);
+  }
 }
 
 void reconnect() {
@@ -288,6 +260,7 @@ void reconnect() {
       client.publish(TOPIC"online", "1");
       client.subscribe(TOPIC"light");
       client.subscribe(TOPIC"ledint");
+      client.subscribe(TOPIC"windspeed");
       char vout[7];
       sprintf(vout, "%.1f", temp_out);
       client.publish(TOPIC"tempout", vout);
@@ -303,3 +276,56 @@ void reconnect() {
   }
   digitalWrite(LED_MQ, HIGH);
 }
+
+boolean getTiH(void)
+{
+  float htValue, fTemp;
+  htValue = ht2x.readTemperature();                //accuracy +-0.3C in range 0C..60C at 14-bit
+  Serial.print(F("Temperature...............: "));
+  if (htValue != HTU2XD_SHT2X_SI70XX_ERROR)        //HTU2XD_SHT2X_SI70XX_ERROR = 255, library returns 255 if error occurs
+  {
+    Serial.print(htValue);
+    Serial.println(F(" +-0.3C"));
+    fTemp = htValue;
+  }
+  else
+  {
+    Serial.println(F("<error>"));
+
+    ht2x.softReset();                              //last chance to make it alive, all registers (except heater bit) will set to default
+    ht2x.setHeater(false);                         //true=heater on, false=heater off
+    ht2x.setResolution(HUMD_12BIT_TEMP_14BIT);     //humidity 12-bit, temperature 14-bit
+    WebSerial.println("HTU Bad");
+    return false;
+  }
+  if (htValue != HTU2XD_SHT2X_SI70XX_ERROR)         //if temperature OK, measure RH & calculate compensated humidity
+  {
+    htValue = ht2x.getCompensatedHumidity(htValue); //accuracy +-2% in range 0%..100%/0C..80C at 12-bit, to compensates influence of T on RH
+
+    if (htValue != HTU2XD_SHT2X_SI70XX_ERROR)
+    {
+      Serial.print(htValue);
+      Serial.println(F(" +-2%")); 
+      hum_out = htValue;
+    } 
+  }
+  if (htValue != HTU2XD_SHT2X_SI70XX_ERROR)
+  {
+    if (!isnan(temp_out))
+      temp_out += (fTemp - temp_out) / 30.0;
+    else
+      temp_out = fTemp;
+    if (!isnan(hum_out))
+      hum_out += (htValue - hum_out) / 30.0;
+    else
+      hum_out = htValue;
+    heatindex = calc.heatIndex_c(temp_out, hum_out);
+    dewpoint = calc.dewPoint_c(temp_out, hum_out);
+    apptemp = calc.apparentTemp_c(temp_out, hum_out, windspeed);
+    WebSerial.print("Temp: ");
+    WebSerial.print(fTemp);
+    WebSerial.print(", Hum: ");
+    WebSerial.println(htValue);
+ }
+  return true;
+}