Merge branch 'master' of ssh://192.168.1.250/home/git/AHome

ESP12SmallRoom/platformio.ini

@@ -16,3 +16,7 @@ board_build.ldscript = eagle.flash.1m.ld
 board_build.f_cpu = 26000000L
 upload_protocol = espota
 upload_port = 192.168.1.7
+lib_deps =
+  Adafruit HTU21DF Library @ ^1.1.0
+  PubSubClient @ ^2.8
+;  ESP_EEPROM @ ^2.0.0

ESP12SmallRoom/src/main.cpp

@@ -7,11 +7,13 @@
 #include <Adafruit_HTU21DF.h>
 #include <PubSubClient.h>
 #include <leds.h>
+#include <EEPROM.h>
 
 #define LED_BLUE D5 //GPIO14
 #define LED_GREEN  D6 //GPIO12
 #define LED_RED   D7 //GPIO13
-#define PWR_SENS   D8 //GPIO13
+#define PWR_SENS   D8 //GPIO15
+#define MOVE_SENS D0  //GPIO16
 
 Adafruit_HTU21DF htu = Adafruit_HTU21DF();
 WiFiClient espClient;
@@ -29,10 +31,13 @@ bool izm = false;
 unsigned long cRun;
 int minCnt = 0;
 int measCnt = 1;
+uint8_t mv, oldmv;
+int adc, oldadc, delta;
 
 void reconnect();
 void publishMin();
 void publishSec();
+void callback(char* topic, byte* payload, unsigned int length);
 
 void setup() {
   Serial.begin(9600);
@@ -64,6 +69,7 @@ void setup() {
   pinMode(LED_BLUE, OUTPUT);
   pinMode(LED_RED, OUTPUT);
   pinMode(PWR_SENS, OUTPUT);
+  pinMode(MOVE_SENS, INPUT);
   digitalWrite(LED_GREEN, LOW);
   digitalWrite(LED_BLUE, LOW);
   digitalWrite(LED_RED, LOW);
@@ -79,10 +85,14 @@ void setup() {
   rel_hum = htu.readHumidity();
   //digitalWrite(PWR_SENS, LOW);
   client.setServer(mqtt_server, 1883);
+  client.setCallback(callback);
+  EEPROM.begin(8);
+  EEPROM.get(0, delta);
   cRun = millis();
 }
 
 void loop() {
+  static bool lsSent  = false, lbSent = false;
   ArduinoOTA.handle();
   lGreen.tick();
   lRed.tick();
@@ -93,23 +103,38 @@ void loop() {
   }
   client.loop();
 
-  if(cRun + 999 < millis()){
+  if(cRun + 99 < millis()){
     cRun = millis();
+    adc = analogRead(A0);
+    mv = digitalRead(MOVE_SENS);
+    if(mv != oldmv){
+      oldmv = mv;
+      client.publish("/home/smallroom/move", mv == 0 ? "0" : "1");
+    };
+    //if(abs(adc - oldadc) > delta){
+    if(((adc < delta) && !lsSent) || ((adc >= (delta + 5)) && !lbSent)){
+      char strFVal[6];
+      itoa(adc, strFVal, 10);
+      client.publish("/home/smallroom/light", strFVal);
+      oldadc = adc;
+      if(adc < delta) {lsSent = true; lbSent = false;}
+      else {lbSent = true; lsSent = false;}
+    }
     if(measCnt == 0){
       temp += (htu.readTemperature() - temp) / 6.0f;
       rel_hum += (htu.readHumidity() - rel_hum) / 6.0f;
       digitalWrite(PWR_SENS, LOW);
     }
-    if(++measCnt == 29){
+    if(++measCnt == 299){
       digitalWrite(PWR_SENS, HIGH);
       measCnt = 0;
     }
     //Serial.print("T: ");Serial.print(temp);Serial.print("\tH: ");Serial.println(rel_hum);
-    if(++minCnt == 59){
+    if(++minCnt == 599){
       publishMin();
       minCnt = 0;
     }
-    if(minCnt % 10 == 0) publishSec();
+    if(minCnt % 100 == 0) publishSec();
   }
 }
 
@@ -123,6 +148,10 @@ void reconnect() {
     //Serial.println("connected");  //  "подключен"
     // подписываемся или переподписываемся на топик;
     // можно подписаться не только на один, а на несколько топиков
+    char v[6];
+    ltoa(delta, v, 10);
+    client.publish("/home/smallroom/ldelta", v);
+    client.subscribe("/home/smallroom/ldelta");
   } else {
     //Serial.print("failed, rc=");  //  "подключение не удалось"
     //Serial.print(client.state());
@@ -146,8 +175,10 @@ void publishMin()
       dtostrf(rel_hum, 6, 1, strFVal);
       client.publish("/home/smallroom/rel_hum", strFVal);
     }
-    // itoa(cRun, strFVal, 10);
+    ultoa(adc, strFVal, 10);
-    // client.publish("/home/smallroom/millis", strFVal);
+    client.publish("/home/smallroom/light", strFVal);
+    ultoa(cRun, strFVal, 10);
+    client.publish("/home/smallroom/millis", strFVal);
     //digitalWrite(LED_BLUE, LOW);
   }
 }
@@ -168,8 +199,20 @@ void publishSec()
     }
     itoa(WiFi.RSSI(), strFVal, 10);
     client.publish("/hometest/smallroom/RSSI", strFVal);
-    itoa(cRun, strFVal, 10);
+    ultoa(cRun, strFVal, 10);
     client.publish("/hometest/smallroom/millis", strFVal);
+    ltoa(adc, strFVal, 10);
+    client.publish("/hometest/smallroom/light", strFVal);
+    ultoa(delta, strFVal, 10);
+    client.publish("/hometest/smallroom/ldelta", strFVal);
     //digitalWrite(LED_GREEN, LOW);
   }
 }
+
+void callback(char* topic, byte* payload, unsigned int length) {
+  if(strcmp(topic,"/home/smallroom/ldelta") == 0){
+    delta = atoi((char*)payload);
+    EEPROM.put(0, delta);
+    EEPROM.commit();
+  }
+}

ExtSens/.gitignore

@@ -0,0 +1,5 @@
+.pio
+.vscode/.browse.c_cpp.db*
+.vscode/c_cpp_properties.json
+.vscode/launch.json
+.vscode/ipch

ExtSens/.vscode/extensions.json

@@ -0,0 +1,7 @@
+{
+    // See http://go.microsoft.com/fwlink/?LinkId=827846
+    // for the documentation about the extensions.json format
+    "recommendations": [
+        "platformio.platformio-ide"
+    ]
+}

ExtSens/include/README

@@ -0,0 +1,39 @@
+
+This directory is intended for project header files.
+
+A header file is a file containing C declarations and macro definitions
+to be shared between several project source files. You request the use of a
+header file in your project source file (C, C++, etc) located in `src` folder
+by including it, with the C preprocessing directive `#include'.
+
+```src/main.c
+
+#include "header.h"
+
+int main (void)
+{
+ ...
+}
+```
+
+Including a header file produces the same results as copying the header file
+into each source file that needs it. Such copying would be time-consuming
+and error-prone. With a header file, the related declarations appear
+in only one place. If they need to be changed, they can be changed in one
+place, and programs that include the header file will automatically use the
+new version when next recompiled. The header file eliminates the labor of
+finding and changing all the copies as well as the risk that a failure to
+find one copy will result in inconsistencies within a program.
+
+In C, the usual convention is to give header files names that end with `.h'.
+It is most portable to use only letters, digits, dashes, and underscores in
+header file names, and at most one dot.
+
+Read more about using header files in official GCC documentation:
+
+* Include Syntax
+* Include Operation
+* Once-Only Headers
+* Computed Includes
+
+https://gcc.gnu.org/onlinedocs/cpp/Header-Files.html

ExtSens/lib/README

@@ -0,0 +1,46 @@
+
+This directory is intended for project specific (private) libraries.
+PlatformIO will compile them to static libraries and link into executable file.
+
+The source code of each library should be placed in a an own separate directory
+("lib/your_library_name/[here are source files]").
+
+For example, see a structure of the following two libraries `Foo` and `Bar`:
+
+|--lib
+|  |
+|  |--Bar
+|  |  |--docs
+|  |  |--examples
+|  |  |--src
+|  |     |- Bar.c
+|  |     |- Bar.h
+|  |  |- library.json (optional, custom build options, etc) https://docs.platformio.org/page/librarymanager/config.html
+|  |
+|  |--Foo
+|  |  |- Foo.c
+|  |  |- Foo.h
+|  |
+|  |- README --> THIS FILE
+|
+|- platformio.ini
+|--src
+   |- main.c
+
+and a contents of `src/main.c`:
+```
+#include <Foo.h>
+#include <Bar.h>
+
+int main (void)
+{
+  ...
+}
+
+```
+
+PlatformIO Library Dependency Finder will find automatically dependent
+libraries scanning project source files.
+
+More information about PlatformIO Library Dependency Finder
+- https://docs.platformio.org/page/librarymanager/ldf.html

ExtSens/platformio.ini

@@ -0,0 +1,16 @@
+; PlatformIO Project Configuration File
+;
+;   Build options: build flags, source filter
+;   Upload options: custom upload port, speed and extra flags
+;   Library options: dependencies, extra library storages
+;   Advanced options: extra scripting
+;
+; Please visit documentation for the other options and examples
+; https://docs.platformio.org/page/projectconf.html
+
+[env:pro8MHzatmega328]
+platform = atmelavr
+board = pro8MHzatmega328
+framework = arduino
+monitor_speed = 115200
+lib_deps = enjoyneering/AHT10@^1.1.0

ExtSens/src/main.cpp

@@ -0,0 +1,69 @@
+#include <Arduino.h>
+
+#define MY_DEBUG
+#define MY_RADIO_RF24
+#define MY_RF24_PA_LEVEL RF24_PA_HIGH
+#include <MySensors.h>
+#include <AHT10.h>
+
+uint32_t cRun;
+int BATTERY_SENSE_PIN = A0;
+int sensorValue, batteryPcnt;
+float v;
+int oldBatteryPcnt = 0;
+
+void presentation();
+MyMessage msgTemp(0, V_TEMP);
+MyMessage msgHum(1, V_HUM);
+MyMessage msgMillis(2, V_VAR1);
+MyMessage msgVolts(2, V_VAR2);
+
+AHT10 myAHT10(AHT10_ADDRESS_0X38);
+
+void setup() {
+  analogReference(INTERNAL);
+  sensorValue = analogRead(BATTERY_SENSE_PIN);
+  v = sensorValue * 0.004659498;
+  batteryPcnt = (v * 100) / 4.2;
+  while (myAHT10.begin() != true)
+  {
+    Serial.println(F("AHT10 not connected or fail to load calibration coefficient")); //(F()) save string to flash & keeps dynamic memory free
+    delay(5000);
+  }
+  Serial.println(F("AHT10 OK"));
+  Serial.print(F("Temperature: ")); Serial.print(myAHT10.readTemperature(AHT10_FORCE_READ_DATA)); Serial.println(F(" +-0.3C"));
+  Serial.print(F("Humidity...: ")); Serial.print(myAHT10.readHumidity(AHT10_USE_READ_DATA));      Serial.println(F(" +-2%"));
+
+  cRun = millis();
+  send(msgMillis.set(cRun));
+}
+
+void loop() {
+    float temp, hum;
+    //if((cRun + 29999) < millis()){
+      cRun = millis();
+      temp = myAHT10.readTemperature(AHT10_FORCE_READ_DATA);
+      hum = myAHT10.readHumidity(AHT10_USE_READ_DATA);
+      Serial.print(F("Temperature: ")); Serial.print(temp); Serial.println(F(" +-0.3C"));
+      Serial.print(F("Humidity...: ")); Serial.print(hum);  Serial.println(F(" +-2%"));
+      if (temp < 200){
+        send(msgTemp.set(temp, 1));
+        send(msgHum.set(hum, 1));
+      }
+      send(msgMillis.set(cRun));
+      sensorValue = analogRead(BATTERY_SENSE_PIN);
+      v = sensorValue * 0.004659498;
+      batteryPcnt = (v-3 * 100) / 1.2;
+      sendBatteryLevel(batteryPcnt);
+      send(msgVolts.set(v, 2));
+    //}
+    sleep(60000 - (millis() - cRun));
+}
+
+void presentation()
+{
+	sendSketchInfo("ExtSens", "1.2");
+	present(0, S_TEMP, "Temp");
+	present(1, S_HUM, "Humid");
+	present(2, S_CUSTOM, "ESMillis");
+}

ExtSens/test/README

@@ -0,0 +1,11 @@
+
+This directory is intended for PlatformIO Unit Testing and project tests.
+
+Unit Testing is a software testing method by which individual units of
+source code, sets of one or more MCU program modules together with associated
+control data, usage procedures, and operating procedures, are tested to
+determine whether they are fit for use. Unit testing finds problems early
+in the development cycle.
+
+More information about PlatformIO Unit Testing:
+- https://docs.platformio.org/page/plus/unit-testing.html

Kuhnya/src/main.cpp

@@ -120,6 +120,8 @@ void setup() {
 
 void loop() {
   float tempT(NAN), humT(NAN), pressT(NAN);
+  static int gint = 1;
+  static bool gdir = true;
 
   ArduinoOTA.handle();
 
@@ -131,16 +133,23 @@ void loop() {
   }
   if((crun + 199) < millis()){
     crun = millis();
+    minCount++;
+
+    if(gdir) gint += 25;
+    else gint -= 25;
+    if((gint > 499) || (gint < 2)) gdir = !gdir;
+    analogWrite(GREEN, gint);
+
     adc = analogRead(A0);
     mv = digitalRead(MOVE_S);
     if(mv != prMV){
       if(mv){
-        //mv = true;
+        mv = true;
         lcd.setBacklight(255);
         mqttClient.publish("/home/kuh/move", 1, false, "1");
       }
       else{
-        //mv = false;
+        mv = false;
         lcd.setBacklight(0);
         mqttClient.publish("/home/kuh/move", 1, false, "0");
       }
@@ -155,22 +164,21 @@ void loop() {
       lightOn = true;
     }
 
-    //if(((minCount+5) % 10) == 0){ //Once in Second
+    if(((minCount+5) % 10) == 0){ //Once in 2 Second
       bme.read(pressT, tempT, humT, tempUnit, presUnit);
       if(!isnan(pressT)){ 
-        if(!isnan(press)) press += (pressT / 133.322f - press) / 600.0f;
+        if(!isnan(press)) press += (pressT / 133.322f - press) / 30.0f;
         else press = pressT / 133.322f;
       }
       if(!isnan(tempT)){
-        if(!isnan(tempIn)) tempIn += (tempT - tempIn) / 300.0f;
+        if(!isnan(tempIn)) tempIn += (tempT - tempIn) / 30.0f;
         else tempIn = tempT;
       }
       if(!isnan(humT)){
-        if(!isnan(hum)) hum += (humT - hum) / 300.0f;
+        if(!isnan(hum)) hum += (humT - hum) / 30.0f;
         else hum = humT;
       }
-    //}
+    }
-    minCount++;
     if (minCount == 300){  //Once in Minute
       lcd.begin(16, 2);
       publishMin();
@@ -178,7 +186,8 @@ void loop() {
     }
     if((minCount % 5) == 0){ //Once in Second
       getTemp();
-      publishSec();
+      //digitalWrite(GREEN, !digitalRead(GREEN));
+      //publishSec();
       showLCD(LCDpage, mv);
     }
   }
@@ -221,7 +230,7 @@ void showLCD(int page, bool l_on)
 
 void publishSec()
 {
-  digitalWrite(GREEN, HIGH);
+/*  digitalWrite(GREEN, HIGH);
   dtostrf(tempOut, 6, 1, strFVal);
   mqttClient.publish("/hometest/kuh1s/temp_out", 1, false, strFVal);
   dtostrf(tempIn, 6, 1, strFVal);
@@ -240,8 +249,7 @@ void publishSec()
   mqttClient.publish("/hometest/kuh1s/moroz", 1, false, strFVal);
   itoa(crun, strFVal, 10);
   mqttClient.publish("/hometest/kuh1s/millis", 1, false, strFVal);
-  digitalWrite(GREEN, LOW);
+  digitalWrite(GREEN, LOW);*/
-  //}
 }
 
 void publishMin()
@@ -263,10 +271,10 @@ void publishMin()
     dtostrf(press, 6, 1, strFVal);
     mqttClient.publish("/home/kuh/pressure", 1, false, strFVal);
   }
-  itoa(lightSP, strFVal, 10);
+  //itoa(lightSP, strFVal, 10);
-  mqttClient.publish("/home/kuh/light_sp", 1, false, strFVal);
+  //mqttClient.publish("/home/kuh/light_sp", 1, false, strFVal);
-  itoa(lightDB, strFVal, 10);
+  //itoa(lightDB, strFVal, 10);
-  mqttClient.publish("/home/kuh/light_db", 1, false, strFVal);
+  //mqttClient.publish("/home/kuh/light_db", 1, false, strFVal);
   itoa(adc, strFVal, 10);
   mqttClient.publish("/home/kuh/light_cur", 1, false, strFVal);
   if(!isnan(tempHol)){
@@ -346,8 +354,10 @@ void onWifiDisconnect(const WiFiEventStationModeDisconnected& event) {
 void onMqttConnect(bool sessionPresent) {
   char v[6];
   itoa(lightData.SP, v, 10);
+  mqttClient.publish("/home/kuh/light_sp", 1, false, v);
   mqttClient.publish("/home/kuh/light_sp_set", 1, false, v);
   itoa(lightData.DB, v, 10);
+  mqttClient.publish("/home/kuh/light_db", 1, false, v);
   mqttClient.publish("/home/kuh/light_db_set", 1, false, v);
   mqttClient.publish("/home/kuh/move", 1, false, mv == 1 ? "1" : "0");
   mqttClient.subscribe("/home/kuh/light_sp_set", 1);
@@ -364,13 +374,18 @@ void onMqttDisconnect(AsyncMqttClientDisconnectReason reason) {
 
 void onMqttMessage(char* topic, char* payload, AsyncMqttClientMessageProperties properties, size_t len, size_t index, size_t total) {
   bool w = false;
+  char v[6];
   if(strcmp(topic, "/home/kuh/light_sp_set") == 0){
     lightSP = atoi(payload);
     w = true;
+    itoa(lightData.SP, v, 10);
+    mqttClient.publish("/home/kuh/light_sp", 1, false, v);
   }
   if(strcmp(topic, "/home/kuh/light_db_set") == 0){
     lightDB = atoi(payload);
     w = true;
+    itoa(lightData.DB, v, 10);
+    mqttClient.publish("/home/kuh/light_db", 1, false, v);
   }
   if(w){
     lightData.SP = lightSP;

MYS_Home.code-workspace

@@ -65,6 +65,10 @@
 		},
 		{
 			"path": "Kuhnya"
+		},
+		{
+			"name": "ExtSens",
+			"path": "ExtSens"
 		}
 	],
 	"settings": {

MidRoomNLight/src/main.cpp

@@ -1,62 +1,21 @@
 #include <Arduino.h>
 
-/*
- * The MySensors Arduino library handles the wireless radio link and protocol
- * between your home built sensors/actuators and HA controller of choice.
- * The sensors forms a self healing radio network with optional repeaters. Each
- * repeater and gateway builds a routing tables in EEPROM which keeps track of the
- * network topology allowing messages to be routed to nodes.
- *
- * Created by Henrik Ekblad <henrik.ekblad@mysensors.org>
- * Copyright (C) 2013-2019 Sensnology AB
- * Full contributor list: https://github.com/mysensors/MySensors/graphs/contributors
- *
- * Documentation: http://www.mysensors.org
- * Support Forum: http://forum.mysensors.org
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- *******************************
- *
- * REVISION HISTORY
- * Version 1.0 - Henrik Ekblad
- *
- * DESCRIPTION
- * Example sketch showing how to control physical relays.
- * This example will remember relay state after power failure.
- * http://www.mysensors.org/build/relay
- */
-
-// Enable debug prints to serial monitor
 #define MY_DEBUG
 
 // Enable and select radio type attached
 #define MY_RADIO_RF24
-//#define MY_RADIO_NRF5_ESB
-//#define MY_RADIO_RFM69
-//#define MY_RADIO_RFM95
-
-// Enable repeater functionality for this node
-//#define MY_REPEATER_FEATURE
-
 #include <MySensors.h>
 
-#define RELAY_PIN 4  // Arduino Digital I/O pin number for first relay (second on pin+1 etc)
+#define RELAY_PIN 3  // Arduino Digital I/O pin number for first relay (second on pin+1 etc)
-#define NUMBER_OF_RELAYS 1 // Total number of attached relays
-#define RELAY_ON 1  // GPIO value to write to turn on attached relay
-#define RELAY_OFF 0 // GPIO value to write to turn off attached relay
 
+//MyMessage msgLev(1, V_DIMMER);
+uint16_t lightLevel;
+bool lightOn = false;
 
 void before()
 {
-    for (int sensor=1, pin=RELAY_PIN; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) {
+    pinMode(RELAY_PIN, OUTPUT);
-        // Then set relay pins in output mode
+    lightLevel = loadState(0);
-        pinMode(pin, OUTPUT);
-        // Set relay to last known state (using eeprom storage)
-        digitalWrite(pin, loadState(sensor)?RELAY_ON:RELAY_OFF);
-    }
 }
 
 void setup()
@@ -67,12 +26,8 @@ void setup()
 void presentation()
 {
     // Send the sketch version information to the gateway and Controller
-    sendSketchInfo("Relay", "1.0");
+    sendSketchInfo("Night Light", "2.0");
-
+    present(0, S_DIMMER, "Dimmer");
-    for (int sensor=1, pin=RELAY_PIN; sensor<=NUMBER_OF_RELAYS; sensor++, pin++) {
-        // Register all sensors to gw (they will be created as child devices)
-        present(sensor, S_BINARY);
-    }
 }
 
 
@@ -83,16 +38,29 @@ void loop()
 
 void receive(const MyMessage &message)
 {
-    // We only expect one type of message from controller. But we better check anyway.
+    switch(message.getType()){
-    if (message.getType()==V_STATUS) {
+        case V_STATUS:
-        // Change relay state
+            if(message.getBool() == true) {
-        digitalWrite(message.getSensor()-1+RELAY_PIN, message.getBool()?RELAY_ON:RELAY_OFF);
+                analogWrite(RELAY_PIN, lightLevel);
-        // Store state in eeprom
+                lightOn = true;
-        saveState(message.getSensor(), message.getBool());
+            }
-        // Write some debug info
+            else {
-        Serial.print("Incoming change for sensor:");
+                analogWrite(RELAY_PIN, 0);
-        Serial.print(message.getSensor());
+                lightOn = false;
-        Serial.print(", New status: ");
+            }
-        Serial.println(message.getBool());
+            Serial.print("Incoming change for sensor:");
+            Serial.print(message.getSensor());
+            Serial.print(", New status: ");
+            Serial.println(message.getBool());
+            break;
+        case V_PERCENTAGE:
+            saveState(0, message.getUInt());
+            lightLevel = message.getUInt();
+            if(lightOn) analogWrite(RELAY_PIN, lightLevel);
+            Serial.print("Incoming change for dimmer:");
+            Serial.print(message.getSensor());
+            Serial.print(", New value: ");
+            Serial.println(message.getUInt());
+            break;
     }
 }